strange behavior with g400e

Hi,

Please add my skype below. And Prepare remote access for checking.

Best regards

Skype: linda.li258
email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Did you manage to resolve this? I'm having exactly the same problem here!

Hi,

Sorry for delay. It's normal if there is no sim card insert. If you have pluged the sim card, that maybe the sim card was not pluged well. Please unplug the sim card and plug it again. If it still cannot work well, you can contact me via skype, I'll help you to check it.

Best regards,

skype: linda.li258
email: This email address is being protected from spambots. You need JavaScript enabled to view it.

SIM is inserted and calls work fine following a hard reset, but Elastix starts returning the 'GSM reset power of module on D-channel of span 1(Send AT Command timeout and resend failed)' after a day or two.

I've just re-installed Elastix (this time without loading the modules indicated in the install guide, as it doesn't appear to need them in this version of Elastix) and will see how it goes over the next few days. Will return to give an update then

Many thanks, Jeremy

Ok, I might need some help. The G400E stayed up for just 20 minutes last night before failing, following a complete rebuild of the OpenVox IX132.

2015-03-17 00:49:52 NOTICE [6327] chan_extra.c:
GSM reset power of module on D-channel of span 1(Send AT Command timeout and resend failed)

Is the new G400P driver mentioned likely to fix this, do you think?

Hi,

Sorry for delay. It's normal. If you cannot make calls using the G400, you can contact me via skype, I'll help you to check it.

Best regards,

skype: linda.li258
email: This email address is being protected from spambots. You need JavaScript enabled to view it.